Page 2 of 6
Re: Release 3rd May
Posted: Sun May 03, 2020 4:41 pm
by n7rde
Thanks especially for the DCS function several of my local repeaters use it
Added DCS support to all versions. Thanks to KC7RBW
Improved CTCSS and DCS GUI. Thanks to F1RMB.
Ron N7RDE
Re: Release 3rd May
Posted: Sun May 03, 2020 5:18 pm
by F1RMB
Hi,
About the sound problem, I will flash the released FW to check that, if I can reproduce here.
Cheers.
---
Daniel
Re: Release 3rd May
Posted: Sun May 03, 2020 5:27 pm
by F6GVE
Thanks a lot. Didn't test it yet but the DCS implementation is a nice surprice
I also had the bug with the sound
For Daniel: just have to set the sound level to -12 dB (this is my setting lol) and flash.
It is easy to workaround, as it is only necessary to set the sound level to 3 dB, (the sound is instantly back) and immediatly set back to -12 dB.
EDIT: this workaround is not permanent, it has to be done each time that the TRX is switched on
EDIT: not everytime
Re: Release 3rd May
Posted: Sun May 03, 2020 5:49 pm
by F1RMB
For the ones who have problem with the sound, do you have a boot melody ?
Just tried the latest release build, I don't have the problem, but I have a boot melody.
Cheers.
---
Daniel
Re: Release 3rd May
Posted: Sun May 03, 2020 6:01 pm
by F1CXG
no boot melody
Re: Release 3rd May
Posted: Sun May 03, 2020 6:06 pm
by F1RMB
F1CXG wrote: ↑Sun May 03, 2020 6:01 pm
no boot melody
Okay, I will remove mine.
Thanks Thierry.
---
Daniel
Re: Release 3rd May
Posted: Sun May 03, 2020 6:11 pm
by F1CXG
rectification, I have a melody in my configuration, BUT no sound on starting....
Re: Release 3rd May
Posted: Sun May 03, 2020 6:14 pm
by F1RMB
F1CXG wrote: ↑Sun May 03, 2020 6:11 pm
rectification, I have a melody in my configuration, BUT no sound on starting....
Do you have a picture of text boot screen ?
Re: Release 3rd May
Posted: Sun May 03, 2020 6:17 pm
by F1CXG
Yes
Re: Release 3rd May
Posted: Sun May 03, 2020 6:17 pm
by F1CXG
While looking for "3dB" on the forum, I found this message of January 28:
"I just noticed that one of my GD77 which had audio only if the Beeps were set to + 3dB works normally now, it is following one of the last versions but which one?
I am currently using the "opengd77_202001281728.sgl" and all is Ok !!! "