Release 3rd May
Re: Release 3rd May
When I switch the GD77 on, I have no sound at all. This means no melody, no beep, no audio BF DMR, no audio BF FM
I have to set the audio beep option to 0 or +3 db for my sound to come back.
I can also just wait for a long time and suddenly all the audio is coming back
The DCS works quite nice
I have to set the audio beep option to 0 or +3 db for my sound to come back.
I can also just wait for a long time and suddenly all the audio is coming back
The DCS works quite nice
Re: Release 3rd May
The problem is possibly that I removed some code that seemed redundant in the C6000 initialisation
https://github.com/rogerclarkmelbourne/ ... 35f213ca5d
I will try to restore it
https://github.com/rogerclarkmelbourne/ ... 35f213ca5d
I will try to restore it
Re: Release 3rd May
I will send you a test version via email to see if it resolves the problemK1ST wrote: ↑Sun May 03, 2020 7:40 pmMy GD-77 is also exhibiting the beep issue. The startup CW plays barely audible. I hit the up button a few times and the tone returns to normal. I have my Beep volume set to 0 db. Issue wasn't in the previous release. I also tried the DCS beta release and it wasn't there either. Steve, K1ST
Re: Release 3rd May
I will send you a test version via email to see if it resolves the problemF1CXG wrote: ↑Sun May 03, 2020 6:17 pmWhile looking for "3dB" on the forum, I found this message of January 28:
"I just noticed that one of my GD77 which had audio only if the Beeps were set to + 3dB works normally now, it is following one of the last versions but which one?
I am currently using the "opengd77_202001281728.sgl" and all is Ok !!! "
Re: Release 3rd May
OK.
After feedback from N1ID and K1ST, the problem seems to be the change I made to the C6000 initialisation, and i have reverted this change and uploaded new versions of the SGL to github, to replace the ones in this release
After feedback from N1ID and K1ST, the problem seems to be the change I made to the C6000 initialisation, and i have reverted this change and uploaded new versions of the SGL to github, to replace the ones in this release
Re: Release 3rd May
It is a bit strange that the original version of the May 3 update works correctly for some numbers of users and for a few not. For me, the bip settings are -12dB and after uploading the original version of May 3 it is OK. I wonder whether to upload the second (improved) version by Roger or stay with the original.
Re: Release 3rd May
Download the updated version from the 3rd May release. This re-instates some code that seems to be needed on some radios.SQ7PTE wrote: ↑Mon May 04, 2020 5:49 amIt is a bit strange that the original version of the May 3 update works correctly for some numbers of users and for a few not. For me, the bip settings are -12dB and after uploading the original version of May 3 it is OK. I wonder whether to upload the second (improved) version by Roger or stay with the original.
Re: Release 3rd May
After uploading the original (first) version, I noticed that the BER error - when transmitting decreased from about 1.8 to 0.2-0.1 Fantastic ....
Re: Release 3rd May
OKAY. Roger
Yes, I will do as you write.
greetings
Yes, I will do as you write.
greetings
Re: Release 3rd May
After uploading the latest software to GD77 from May 4, I was forced to increase the Tx radio frequency by 50 Hz to work with a two-slot hotspot. However, after uploading the latest software to the RD-5R, so far I haven't found the frequency at which communication between the radio and the hotspot will occur. Both radios no longer have a problem playing audio. Thank you for quick action.