Release 30th April

IU1MCR
Posts: 13
Joined: Sun Mar 15, 2020 4:07 pm
Location: Italy Novara - JN45hk

Re: Release 30th April

Post by IU1MCR » Thu Apr 30, 2020 4:12 pm

Hello Roger,
I'll try it on my GD77 and RD5R
Ciao
Eugenio

do2sta
Posts: 3
Joined: Sat Nov 23, 2019 5:22 am
Location: Gelnhausen, Germany
Contact:

Re: Release 30th April

Post by do2sta » Fri May 01, 2020 6:23 am

Unfortunately my RD5R does not work with the new firmware and my MMDVM hotspot. I would probably have to make an RX / TX correction at the MMDVM hotspot. Then my other radio devices with the hotspot no longer work. I hope there is still a solution. 73 Stefan, DO2STA

User avatar
F1RMB
Posts: 2518
Joined: Sat Nov 16, 2019 5:42 am
Location: Grenoble, France

Re: Release 30th April

Post by F1RMB » Fri May 01, 2020 7:47 am

Hi,
do2sta wrote:
Fri May 01, 2020 6:23 am
Unfortunately my RD5R does not work with the new firmware and my MMDVM hotspot. I would probably have to make an RX / TX correction at the MMDVM hotspot. Then my other radio devices with the hotspot no longer work. I hope there is still a solution. 73 Stefan, DO2STA
If you have access to frequency counter, you can check if it's properly aligned.


Cheers.
---
Daniel

MM6NRK
Posts: 67
Joined: Wed Apr 22, 2020 1:09 pm

Re: Release 30th April

Post by MM6NRK » Fri May 01, 2020 8:43 am

do2sta wrote:
Fri May 01, 2020 6:23 am
Unfortunately my RD5R does not work with the new firmware and my MMDVM hotspot. I would probably have to make an RX / TX correction at the MMDVM hotspot. Then my other radio devices with the hotspot no longer work. I hope there is still a solution. 73 Stefan, DO2STA
New firmware .It works fine with my MMDVM hotspot .

SO5AJG
Posts: 91
Joined: Sat Nov 16, 2019 3:44 pm
Location: Warsaw, Poland

Re: Release 30th April

Post by SO5AJG » Fri May 01, 2020 10:44 am

do2sta wrote:
Fri May 01, 2020 6:23 am
Unfortunately my RD5R does not work with the new firmware and my MMDVM hotspot. I would probably have to make an RX / TX correction at the MMDVM hotspot. Then my other radio devices with the hotspot no longer work. I hope there is still a solution. 73 Stefan, DO2STA
Unfortunately, I have the same problem and that's why I downloaded the factory software again and my RD-5R connects seamlessly to my two single- and dual-slot hotspots. After uploading OpenRD-5R software I can no longer connect to either hotspot or the other. Only after reducing the frequency -700Hz in TX radio was restored. I can't change anything in the hotspot (Offset), because the other three radios will have the same problem as the RD-5R.

User avatar
W1AEX
Posts: 126
Joined: Sat Nov 16, 2019 9:00 pm
Location: Connecticut, USA
Contact:

Re: Release 30th April

Post by W1AEX » Fri May 01, 2020 5:16 pm

Yesterday, I loaded the April 30 release on both of my GD-77s and they are working beautifully. Thank you for another fine release!

73, Rob W1AEX

4O6DTM
Posts: 7
Joined: Sun Mar 01, 2020 12:33 pm

Re: Release 30th April

Post by 4O6DTM » Fri May 01, 2020 10:20 pm

Hi,

does anyone else have the problem on FM, especially on repeaters, when the other party is over-modulated (to close to microphone or too much mic gain), the RX on GD77 starts to break (stutter) ? I noticed this on two latest final releases.

Otherwise working great, thank you!

73, de 4O6DTM

User avatar
EB3AM
Posts: 204
Joined: Fri Jan 24, 2020 1:40 pm
Location: Catalonia, not Spain
Contact:

Re: Release 30th April

Post by EB3AM » Fri May 01, 2020 10:57 pm

4O6DTM wrote:
Fri May 01, 2020 10:20 pm
Hi,

does anyone else have the problem on FM, especially on repeaters, when the other party is over-modulated (to close to microphone or too much mic gain), the RX on GD77 starts to break (stutter) ? I noticed this on two latest final releases.

Otherwise working great, thank you!

73, de 4O6DTM
Maybe this help:
Is just this same version with the RIKU, OH1E mod viewtopic.php?f=11&t=794&start=10#p7848

https://filebin.net/wxlfl201jmx6wip4/Op ... t=2c413w2j <-- opengd77_riku.sgl

4O6DTM
Posts: 7
Joined: Sun Mar 01, 2020 12:33 pm

Re: Release 30th April

Post by 4O6DTM » Fri May 01, 2020 11:22 pm

Tnx Jordi,

it seems to be the same problem, I haven't noticed until I read that post that all repeaters I noticed the problem on transmit with Ctcss. I will post on that post also.

73, 4O6DTM

F6GVE
Posts: 84
Joined: Sat Nov 16, 2019 8:52 am

Re: Release 30th April

Post by F6GVE » Sat May 02, 2020 10:26 am

Hi
I still have the bug that I mentionned about the previous pre-release
All my 3 GD77 have the same:

When switching from a FM channel towards a DMR channel (only tested towards a busy DMR channel) the RX sound is muted.

DMR -> DMR no problem
FMN -> DMR no problem
FM -> DMR no sound

73 and thanks again for the huge job that's being done

Post Reply