Page 3 of 3
Re: Rx wider frequency range
Posted: Mon Apr 20, 2020 1:59 pm
by F1RMB
Hi,
CX2JO wrote: ↑Mon Apr 20, 2020 1:54 pm
F1RMB wrote: ↑Mon Apr 20, 2020 1:35 pm
Hi,
If I verify that exactly, then I have another one that in uhf I cannot achieve that transmits in hotspot mode in uhf, I don't know if this problem has happened to someone. Do you say that in the 200mhz band in rx and tx it has the same range? and what power does it offer?
thanks
CX2JO wrote: ↑Mon Apr 20, 2020 1:21 pm
HI.MY BAOFEN DM-1801 IN TX WORK:
136000 to 172000 - vhf
381000 to 500000 - uhf
does not work at 200 mhz, is this so? Can someone make it work in that band correctly?
73
Did you turned "Band Limits" off, in the Options ?
Cheers.
---
Daniel
Sorry but I don't get the question.
If Band Limits is ON (default setting), the 1.5m band is : 222 .. 225MHz
Cheers.
---
Daniel
Re: Rx wider frequency range
Posted: Mon Apr 20, 2020 2:37 pm
by CX2JO
If Band Limits is ON (default setting), the 1.5m band is : 222 .. 225MHz
ok,
With which version of fw do you manage to transmit in that band? Could you pass me the link or the file for 1801? since with the fw dated 04/18 I could not make it transmit.
73
Javier
F1RMB wrote: ↑Mon Apr 20, 2020 1:59 pm
Hi,
CX2JO wrote: ↑Mon Apr 20, 2020 1:54 pm
F1RMB wrote: ↑Mon Apr 20, 2020 1:35 pm
Hi,
If I verify that exactly, then I have another one that in uhf I cannot achieve that transmits in hotspot mode in uhf, I don't know if this problem has happened to someone. Do you say that in the 200mhz band in rx and tx it has the same range? and what power does it offer?
thanks
Did you turned "Band Limits" off, in the Options ?
Cheers.
---
Daniel
Sorry but I don't get the question.
If Band Limits is ON (default setting), the 1.5m band is : 222 .. 225MHz
Cheers.
---
Daniel
Re: Rx wider frequency range
Posted: Mon Apr 20, 2020 2:43 pm
by F1RMB
Hi,
CX2JO wrote: ↑Mon Apr 20, 2020 2:37 pm
If Band Limits is ON (default setting), the 1.5m band is : 222 .. 225MHz
ok,
With which version of fw do you manage to transmit in that band? Could you pass me the link or the file for 1801? since with the fw dated 04/18 I could not make it transmit.
73
Javier
F1RMB wrote: ↑Mon Apr 20, 2020 1:59 pm
Hi,
CX2JO wrote: ↑Mon Apr 20, 2020 1:54 pm
Sorry but I don't get the question.
If Band Limits is ON (default setting), the 1.5m band is : 222 .. 225MHz
Cheers.
---
Daniel
Flash the firmware posted by Roger in this thread, in the opening post.
Cheers.
---
Daniel
Re: Rx wider frequency range
Posted: Tue Apr 21, 2020 5:25 am
by OK2HAD
Hi, my gd77 with this firmware goes set in range:
127,000 - 178,000
190,000 - 282,000
380,000 - 564,000
Re: Rx wider frequency range
Posted: Mon May 15, 2023 9:09 pm
by YO3VTH
Re: Rx wider frequency range
Posted: Mon May 15, 2023 9:33 pm
by G4EML
Note that the 220 MHz band is experimental and intended for receive only with reduced sensitivity. Although it appears to transmit, most of the power is NOT on 220 MHZ.
