Experimental version with Rx Group filtering option

Post Reply
VK3KYY
Posts: 2420
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Experimental version with Rx Group filtering option

Post by VK3KYY » Thu Apr 16, 2020 12:05 am

I know a few people still seem to want the RxGroup filtering option, so I've now added this.

The option is part of the DMR filtering in the Quick menu, and displays as "Filter:CC,TS,RxG"

Note.
This strictly adheres to filtering to just the Rx Group. So if you manually enter a TG to transmit, and then use that TG, you will not be able to receive on that TG if its not in the TalkGroup list.

I think however in hindsight, that although people want to filter by the Rx Group, they may want manually diall'ed TGs set for Tx to also be allowed.


Personally I never enable any of the TG filtering, and most often disable the TS filtering, so that I can listen to both TS's on my duplex hotstpot or the local repeater network
Attachments
OpenRD5R.sgl
(481.12 KiB) Downloaded 18 times
OpenDM1801.sgl
(481.11 KiB) Downloaded 13 times
OpenGD77.sgl
(477.06 KiB) Downloaded 47 times

G4EML
Posts: 218
Joined: Sat Nov 16, 2019 10:01 am

Re: Experimental version with Rx Group filtering option

Post by G4EML » Thu Apr 16, 2020 8:57 am

Hi Roger,

Yes, the talkgroup selected for transmit always needs to be included. The manufacturers firmware didn’t do that and it caused a lot of confusion for people. I can’t foresee any situation where you would not want to hear the talkgroup you were transmitting on.

Colin

VK3KYY
Posts: 2420
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Experimental version with Rx Group filtering option

Post by VK3KYY » Thu Apr 16, 2020 9:48 am

Colin

Thanks. I've now added the Tx TG, in the checking.
In fact I check the Tx TG first, as I suspect most of the time the Tx TG will be the incoming TG.
Attachments
OpenRD5R.sgl
(481.12 KiB) Downloaded 11 times
OpenGD77.sgl
(477.06 KiB) Downloaded 49 times
OpenDM1801.sgl
(481.11 KiB) Downloaded 9 times

kt4lh
Posts: 138
Joined: Sun Jan 12, 2020 4:27 am

Re: Experimental version with Rx Group filtering option

Post by kt4lh » Fri Apr 17, 2020 3:29 am

AWESOME!!! I am going to check this out right now. Probably won't have any immediate feedback as the repeaters are quiet at night but I'll listen tomorrow and check it out. Thank you!

And yes, including the current group makes the most sense. :)

Post Reply