Page 2 of 7
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 8:30 am
by F1RMB
IV3XHF wrote: ↑Sun Mar 22, 2020 8:29 am
Hello Daniel,
I try the firmware loader with Windows 10 and GD77 it works well without problems.
Thanks for this beautiful work
IV3XHF Dario
Thanks Dario.
Cheers.
---
Daniel
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 10:23 am
by VK3KYY
Thanks guys
I think this is safe to add to the next release.
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 12:10 pm
by F1CXG
Too busy with my soldering iron, I was late in testing Daniel's loader, it works without problems on my PC Win 10 pro 64
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 12:24 pm
by F1RMB
Hi Thierry,
F1CXG wrote: ↑Sun Mar 22, 2020 12:10 pm
Too busy with my soldering iron, I was late in testing Daniel's loader, it works without problems on my PC Win 10 pro 64
Not problem, your hotspot looks nice. Thanks for the report.
ATM, only Windows 10 x64 reported, but that seems to work.
Cheers.
---
Daniel
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 12:31 pm
by F1CXG
Thanks to you (again) I can also test a Linux version
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 1:22 pm
by F1RMB
F1CXG wrote: ↑Sun Mar 22, 2020 12:31 pm
Thanks to you (again) I can also test a Linux version
Yup, but you need to install latest "mono-complete" first
Cheers.
---
Daniel
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 1:41 pm
by F1RMB
Hi Thierry,
F1CXG wrote: ↑Sun Mar 22, 2020 12:31 pm
Thanks to you (again) I can also test a Linux version
So, if you're interested in testing the Linux port flasher, you need latest mono. For this, you need to configure the mono apt repository first:
Code: Select all
sudo apt install gnupg ca-certificates
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys 3FA7E0328081BFF6A14DA29AA6A19B38D3D831EF
echo "deb https://download.mono-project.com/repo/ubuntu stable-bionic main" | sudo tee /etc/apt/sources.list.d/mono-official-stable.list
sudo apt update
sudo apt-get install mono-complete
Then, unzip the attached file somewhere, and you could start it from the command line
Code: Select all
cd <where the EXE and the DLL are located>
mono GD77_FirmwareLoader-Linux.exe
or using you desktop environment, right click on the EXE, and ask to run it using Mono.
Cheers.
---
Daniel
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 3:04 pm
by F1CXG
Tnx for all Daniel
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 3:49 pm
by n7rde
Works great
on gd77 win7 64 pro
Thanks
Ron N7RDE
Re: [Sunday tests] Updated firmware loader.
Posted: Sun Mar 22, 2020 3:57 pm
by F1CXG
It works, thank you Daniel
- LOADER LINUX.jpg (133.23 KiB) Viewed 4949 times