Experimental version with option to disable CC filtering

User avatar
m1dyp
Posts: 402
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.

Re: Experimental version with option to disable CC filtering

Post by m1dyp » Thu Feb 27, 2020 12:56 pm

hi, i looked in the cps at my digital channels and the 'open GD77 Squelch Level' was at 15% on all my digitalchannels.
I changed them all to 'disabled' and re=loaded the 1422 firmware.
green led now works normally.
thank you or the info :D
73 de Ken :D

User avatar
EB3AM
Posts: 179
Joined: Fri Jan 24, 2020 1:40 pm
Location: Catalonia, not Spain
Contact:

Re: Experimental version with option to disable CC filtering

Post by EB3AM » Thu Feb 27, 2020 2:02 pm

m1dyp wrote:
Thu Feb 27, 2020 12:56 pm
hi, i looked in the cps at my digital channels and the 'open GD77 Squelch Level' was at 15% on all my digitalchannels.
I changed them all to 'disabled' and re=loaded the 1422 firmware.
green led now works normally.
thank you or the info :D
Interesting.
I will watch as I have, and I will correct it if necessary.
Jordi, EB3AM, Talarn JN02ke, Catalonia.

User avatar
Ik0nwg
Posts: 96
Joined: Sat Nov 16, 2019 7:23 am
Location: JN61VG

Re: Experimental version with option to disable CC filtering

Post by Ik0nwg » Fri Feb 28, 2020 1:58 pm

sorry Roger but now that the CC filter is working properly you could also remove the scan CC function from the menu of the orange button in your opinion?
Sal
Sal Italy jn61vg

VK3KYY
Posts: 2416
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Experimental version with option to disable CC filtering

Post by VK3KYY » Fri Feb 28, 2020 9:04 pm

Ik0nwg wrote:
Fri Feb 28, 2020 1:58 pm
sorry Roger but now that the CC filter is working properly you could also remove the scan CC function from the menu of the orange button in your opinion?
Sal
Yes. CC scan is no longer needed. I will remove it.

KC7RBW
Posts: 169
Joined: Wed Nov 20, 2019 1:23 am

Re: Experimental version with option to disable CC filtering

Post by KC7RBW » Sat Feb 29, 2020 4:18 am

VK3KYY wrote:
Fri Feb 28, 2020 9:04 pm
Ik0nwg wrote:
Fri Feb 28, 2020 1:58 pm
sorry Roger but now that the CC filter is working properly you could also remove the scan CC function from the menu of the orange button in your opinion?
Sal
Yes. CC scan is no longer needed. I will remove it.
Ah, can the radio detect which CC it's receiving now without the scan?
Andrew | KC7RBW | ajorg

VK3KYY
Posts: 2416
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Experimental version with option to disable CC filtering

Post by VK3KYY » Sat Feb 29, 2020 4:25 am

KC7RBW wrote:
Sat Feb 29, 2020 4:18 am
VK3KYY wrote:
Fri Feb 28, 2020 9:04 pm
Ik0nwg wrote:
Fri Feb 28, 2020 1:58 pm
sorry Roger but now that the CC filter is working properly you could also remove the scan CC function from the menu of the orange button in your opinion?
Sal
Yes. CC scan is no longer needed. I will remove it.
Ah, can the radio detect which CC it's receiving now without the scan?
Yes.

If you change the filter setting to None, the radio detects the CC and locks onto it, changing the CC setting for Tx as well as Rx.

NA7Q
Posts: 139
Joined: Wed Jan 01, 2020 3:41 pm

Re: Experimental version with option to disable CC filtering

Post by NA7Q » Sat Feb 29, 2020 5:29 am

VK3KYY wrote:
Sat Feb 29, 2020 4:25 am
KC7RBW wrote:
Sat Feb 29, 2020 4:18 am
VK3KYY wrote:
Fri Feb 28, 2020 9:04 pm


Yes. CC scan is no longer needed. I will remove it.
Ah, can the radio detect which CC it's receiving now without the scan?
Yes.

If you change the filter setting to None, the radio detects the CC and locks onto it, changing the CC setting for Tx as well as Rx.
Is this the full code for the CC disable filter? Thanks to a couple guys on here, I see that when it's built on this, it resets the CC to 0 in VFO or the memory channels if on anything else on a couple of the filters. especially when set to none. They mentioned it on my firmware page.
https://github.com/rogerclarkmelbourne/ ... b39f162255

VK3KYY
Posts: 2416
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Experimental version with option to disable CC filtering

Post by VK3KYY » Sat Feb 29, 2020 5:38 am

NA7Q wrote:
Sat Feb 29, 2020 5:29 am
VK3KYY wrote:
Sat Feb 29, 2020 4:25 am
KC7RBW wrote:
Sat Feb 29, 2020 4:18 am


Ah, can the radio detect which CC it's receiving now without the scan?
Yes.

If you change the filter setting to None, the radio detects the CC and locks onto it, changing the CC setting for Tx as well as Rx.
Is this the full code for the CC disable filter? Thanks to a couple guys on here, I see that when it's built on this, it resets the CC to 0 in VFO or the memory channels if on anything else on a couple of the filters. especially when set to none. They mentioned it on my firmware page.
https://github.com/rogerclarkmelbourne/ ... b39f162255
AFIK. The latest CC code is on the server

NA7Q
Posts: 139
Joined: Wed Jan 01, 2020 3:41 pm

Re: Experimental version with option to disable CC filtering

Post by NA7Q » Sat Feb 29, 2020 5:45 am

Okay, things are being weird tonight. So I tested using the 0c78b5a build. I guess it does produce the same problem with the filtering is off.
Give it a shot. Any channel or VFO, CC set to anything but 0, switch the filter to off, then transmit. You'll see it will revert to 0. If it doesn't, change the frequency, set to anything but 0, and transmit again, it'll change back to 0.

VK3KYY
Posts: 2416
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Experimental version with option to disable CC filtering

Post by VK3KYY » Tue Mar 03, 2020 8:19 pm

Has anyone tried the new version I posted here ?

viewtopic.php?f=13&t=705

Post Reply