Update 9th Feb

VK3KYY
Posts: 1656
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Update 9th Feb

Post by VK3KYY » Sun Feb 09, 2020 4:09 am

I've updated the Latest version with an enhancement from Daniel, which resolves a "feature" caused by the changes to the ID caching in a previous release, where the caller contact information was always displayed on both the middle and bottom line of the display.

https://github.com/rogerclarkmelbourne/ ... latest.sgl

There is a new Display Option setting of "Contact:" which controls which lines on the display are used to display the incoming call details.

The setting has 3 options.

1 Line - This only uses the middle line of the display to show the callsign and name. When using Talker Alias, which contains more than the 16 characters wide of the screen, the text will be cropped, so you will not see the end of the TA text.

2 Lines - The Callsign is displayed on the middle line of the display, and the name and other information will be displayed on the bottom line of the display. i.e the firmware automatically breaks up the "CALLSIGN NAME" format text at the space separating callsign from the name.

Auto - When the Callsign and name will fit on the middle line of the display, only the middle line will be used (this is equivalent to the "1 Line" option.
If the caller information e.g. from TA is longer than 16 characters and won't fit on the middle line, the display will be split onto both lines and is equivalent to the "2 Lines" option

Thanks again to Daniel for this change, because I know a lot of people (me included) prefer to be able to see the bottom line of the display, as it contains the channel name whilst in Channel mode.

User avatar
m1dyp
Posts: 335
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.

Re: Update 9th Feb

Post by m1dyp » Sun Feb 09, 2020 4:41 am

thank you all
73 de Ken :D

User avatar
Ik0nwg
Posts: 66
Joined: Sat Nov 16, 2019 7:23 am
Location: JN61VG

Re: Update 9th Feb

Post by Ik0nwg » Sun Feb 09, 2020 5:39 am

perfect thanks
Sal

DO4CZ
Posts: 42
Joined: Sat Nov 16, 2019 8:55 am

Re: Update 9th Feb

Post by DO4CZ » Sun Feb 09, 2020 7:01 am

Thanks
73, Joerg DO4CZ

IU4LEG
Posts: 123
Joined: Wed Nov 20, 2019 12:49 pm

Re: Update 9th Feb

Post by IU4LEG » Sun Feb 09, 2020 7:49 am

Thanks guy's,
I have already shared the italian.h file updated with the new translations.
73 de IU4LEG

VK3KYY
Posts: 1656
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: Update 9th Feb

Post by VK3KYY » Sun Feb 09, 2020 9:27 am

I just replied to your post with an updated firmware file including the translation. (It will also include Spanish)

IU4LEG
Posts: 123
Joined: Wed Nov 20, 2019 12:49 pm

Re: Update 9th Feb

Post by IU4LEG » Sun Feb 09, 2020 2:55 pm

Thank you Roger

F6GVE
Posts: 43
Joined: Sat Nov 16, 2019 8:52 am

Re: Update 9th Feb

Post by F6GVE » Sun Feb 09, 2020 3:11 pm

So nice. Thank you everyone

LU3ERX
Posts: 4
Joined: Sat Nov 16, 2019 11:20 pm

Re: Update 9th Feb

Post by LU3ERX » Sun Feb 09, 2020 4:47 pm

Testing, Thanks

EB3AM
Posts: 82
Joined: Fri Jan 24, 2020 1:40 pm
Location: Catalonia, not Spain
Contact:

Re: Update 9th Feb

Post by EB3AM » Sun Feb 09, 2020 7:06 pm

Testing hotspot and radio user... (2 radios)

Post Reply