Re: Update 18th Jan
Posted: Sun Jan 19, 2020 10:19 am
BTW. I installed Daniels files on my PiStar 3.x and it works OK.
OpenGD77
Amateur radio firmware for the GD-77, GD-77S, DM-1801, DM-1801A, RD-5R, MD-9600/RT-90, MD-UV380/RT-3S, DM-1701/RT-84 and MD2017/RT-82 radios
https://www.opengd77.com/
Update 18th Jan
Page 2 of 5
Re: Update 18th Jan
Posted: Sun Jan 19, 2020 12:52 pm
all updated and working here, many thanks
Re: Update 18th Jan
Posted: Sun Jan 19, 2020 1:24 pm
Yes, it's full, you have to go through a hosting site ... 
Re: Update 18th Jan
Posted: Mon Jan 20, 2020 2:24 am
Nice work Daniel. Thanks to you, Roger and the others for their updates. It makes this all a lot of fun!
Re: Update 18th Jan
Posted: Mon Jan 20, 2020 3:46 am
Thank you everyone working on the improvement of firmware.
GD-77 can only get better with every update.
I am very excited!!!!
GD-77 can only get better with every update.
I am very excited!!!!
Re: Update 18th Jan
Posted: Mon Jan 20, 2020 4:47 am
After installing Daniel's files everything seems to work fine. If I select CAST the GD77 displays as expected. If I return to my Nextion screen the live log displays a continuous stream of these:
W: 2020-01-20 04:44:40.369 Received a NAK from the MMDVM, command = 0x80, reason = 1
If I run the command to return to the stock files the behavior in the log continues.
W: 2020-01-20 04:44:40.369 Received a NAK from the MMDVM, command = 0x80, reason = 1
If I run the command to return to the stock files the behavior in the log continues.
Re: Update 18th Jan
Posted: Mon Jan 20, 2020 5:54 am
Hi,W1RHS wrote: ↑Mon Jan 20, 2020 4:47 amAfter installing Daniel's files everything seems to work fine. If I select CAST the GD77 displays as expected. If I return to my Nextion screen the live log displays a continuous stream of these:
W: 2020-01-20 04:44:40.369 Received a NAK from the MMDVM, command = 0x80, reason = 1
If I run the command to return to the stock files the behavior in the log continues.
Serial passthrough (command 0x80, aka Nextion), isn't supported (you can't connect your nextion on the GD77
).So, check if you selectect the right serial port in Pi-Star's configuration.
Cheers.
Re: Update 18th Jan
Posted: Mon Jan 20, 2020 7:04 am
Hello i installed this dash update but i get M1ABC callsign in the banner's how can i put in my own callsign ????
Thanks
Thanks
Re: Update 18th Jan
Posted: Mon Jan 20, 2020 7:12 am
Re: Update 18th Jan
Posted: Mon Jan 20, 2020 7:12 am
click configuration, scroll to general setting and enter callsign, dmr id, freq location etc and apply changes
i noticed wifi defaults to JP i had to change mine to GB before it would find and connect
i noticed wifi defaults to JP i had to change mine to GB before it would find and connect