OpenGD77

DG3GSP wrote: ↑

Sun Nov 24, 2019 9:48 am

I have now a problem with my contacts and grouplist: my contact 001 is TG262, it´s allways in the grouplist (and worked before the dev. update).
Now it´s showing TG9 (which is not in my contacts nor grouplist..).

I retry to upload the cp - doesn't help..

P.S: found a minor bug in the Menu->Battery screen: If you set the timeout in the Display option to 5, the Battery screen blinks in 5 seconds interval

I just observed the same problem here after updating to latest Nov 24 build [69d7ab9], Roger. My first contact in the list is now TG9 in the radio, whereas it's TG31088 in the CPS

DG3GSP wrote: ↑

Sun Nov 24, 2019 9:48 am

P.S: found a minor bug in the Menu->Battery screen: If you set the timeout in the Display option to 5, the Battery screen blinks in 5 seconds interval

me too. also. on receiving dmr, the screen now lights up at the end of reception as well as the beginning

W0RMT wrote: ↑

Sun Nov 24, 2019 1:27 pm

DG3GSP wrote: ↑

Sun Nov 24, 2019 9:48 am

I have now a problem with my contacts and grouplist: my contact 001 is TG262, it´s allways in the grouplist (and worked before the dev. update).
Now it´s showing TG9 (which is not in my contacts nor grouplist..).

I retry to upload the cp - doesn't help..

P.S: found a minor bug in the Menu->Battery screen: If you set the timeout in the Display option to 5, the Battery screen blinks in 5 seconds interval

I just observed the same problem here after updating to latest Nov 24 build [69d7ab9], Roger. My first contact in the list is now TG9 in the radio, whereas it's TG31088 in the CPS

Ok.

So this is only on the Contacts screen, not on the Channel screen?

VK3KYY wrote: ↑

Sun Nov 24, 2019 7:20 pm

W0RMT wrote: ↑

Sun Nov 24, 2019 1:27 pm

DG3GSP wrote: ↑

Sun Nov 24, 2019 9:48 am

I have now a problem with my contacts and grouplist: my contact 001 is TG262, it´s allways in the grouplist (and worked before the dev. update).
Now it´s showing TG9 (which is not in my contacts nor grouplist..).

I retry to upload the cp - doesn't help..

P.S: found a minor bug in the Menu->Battery screen: If you set the timeout in the Display option to 5, the Battery screen blinks in 5 seconds interval

I just observed the same problem here after updating to latest Nov 24 build [69d7ab9], Roger. My first contact in the list is now TG9 in the radio, whereas it's TG31088 in the CPS

Ok.

So this is only on the Contacts screen, not on the Channel screen?

No- in the contacts screen but if selected it also shows TG9 on the channels screen.

Ok.

I think I screwed up the range checking, and the first TG is getting overridden by TG 9 as a default

OK.

I found it.

Can you try downloading again

https://github.com/rogerclarkmelbourne/ ... latest.sgl

VK3KYY wrote: ↑

Sun Nov 24, 2019 8:46 pm

OK.

I found it.

Can you try downloading again

https://github.com/rogerclarkmelbourne/ ... latest.sgl

Fixed it- all good now. tnx

Fixed the bug - thanks

Seems to be loading and working fine, nice updates

OK

I think there are some other bugs which can occur when operators don't setup the Contact for a Channel, or for the VFO channel (in the CPS)

In these cases the firmware will be using TG 9, but it should be using the first Contact in the Digital Contacts

I am modifying the firmware, so that if the Contact is not defined for a Channel.. When it is loaded from the codeplug memory, the Contact for the Channel will be set to Contact number 1, as the CPS guarantees there is always 1 digital contact as it can not be removed.