New ongoing "Development" version has been created

[VK3KYY]

I've updated the Development version.

The Changes are

* Possible fix for DTMF and 1750Hz deviation (under deviation) problem (still needs to be verified by DG3GSP)
* Fix for TS override in Contacts not being honoured when Contact is selected by ### on the Channel or VFO screen, or from the Contacts menu -> Contacts List.

[m1dyp]

thank you

[W1CY]

I've updated the Development version.

The Changes are

* Possible fix for DTMF and 1750Hz deviation (under deviation) problem (still needs to be verified by DG3GSP)
* Fix for TS override in Contacts not being honoured when Contact is selected by ### on the Channel or VFO screen, or from the Contacts menu -> Contacts List.

Thanks, I have already loaded the latest dev version to both of my GD-77s.

[VK3KYY]

The development version has been updated to split the DMR filtering into 3 separate filters

Colour Code
TimeSlot
DMR destination filter i.e None, TG, RxG or Ct (Contact)

This is to allow any destination filter to be applied even if the TimeSlot or Colour Code filter is not applied

Voice prompts have been updated to correspond with this change.

The User Guide has not been updated yet (because I've not had time)

[m1dyp]

thank you

[Ik0nwg]

The development version has been updated to split the DMR filtering into 3 separate filters

Colour Code
TimeSlot
DMR destination filter i.e None, TG, RxG or Ct (Contact)

This is to allow any destination filter to be applied even if the TimeSlot or Colour Code filter is not applied

Voice prompts have been updated to correspond with this change.

The User Guide has not been updated yet (because I've not had time)

very useful update, thanks Roger
ciao

[DO4CZ]

Yes it is !
Thanks for the update, Roger!

[kt4lh]

The development version has been updated to split the DMR filtering into 3 separate filters

Colour Code
TimeSlot
DMR destination filter i.e None, TG, RxG or Ct (Contact)

This is to allow any destination filter to be applied even if the TimeSlot or Colour Code filter is not applied

Voice prompts have been updated to correspond with this change.

The User Guide has not been updated yet (because I've not had time)

This is terrific, I've long thought it'd be great for these to be broken out into individual flags or such but didn't want to press my luck at the time it was getting done at all I will try this out today.

[VK3KYY]

Its not completely individual flags

The Destination ID / Group is still a list options, ie you can't filter on just the current TG and your private contracts.

But the change serves the purpose I need to listen on both TS but filter on private contacts

[VK3KYY]

Development version has been updated to fix a boot loop problem caused if boot melody notes of very high pitch. Greater than note value 47 were used.
New note pitches have been added to note value 63 and note values are now checked before they are played.
If a not value higher than 63 is used, then the note will be changed to note 63.