New ongoing "Development" version has been created

User avatar
OK2HAD
Posts: 52
Joined: Wed Jan 08, 2020 1:10 pm
Location: Uherský Brod (Czech Republic)

Re: New ongoing "Development" version has been created

Post by OK2HAD » Mon Jun 29, 2020 11:59 am

Hi,
installed in my GD77. So far, everything is fine for 5 hours of testing.

F6GVE
Posts: 84
Joined: Sat Nov 16, 2019 8:52 am

Re: New ongoing "Development" version has been created

Post by F6GVE » Mon Jun 29, 2020 7:13 pm

Used this version today, all the day long. I only used the basic operation (TX+RX DMR via hostpot an local repeater); I experimented no bug or something bad. In fact all was as everyday use

OM8AMV
Posts: 75
Joined: Thu Jun 25, 2020 7:26 pm

Re: New ongoing "Development" version has been created

Post by OM8AMV » Wed Jul 01, 2020 5:08 pm

I try this version, but sound prompt after set to silent and turn off power, is back to beep, not silent

VK3KYY
Posts: 7579
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Thu Jul 02, 2020 2:46 am

The development version has been updated to fix the bug where sounds could not be completely disabled unless voice prompts were loaded

https://github.com/rogerclarkmelbourne/ ... 2020.06.28

User avatar
m1dyp
Posts: 605
Joined: Sat Nov 16, 2019 8:03 am
Location: Hertfordshire, U.K.
Contact:

Re: New ongoing "Development" version has been created

Post by m1dyp » Thu Jul 02, 2020 5:20 am

thank you

VK3KYY
Posts: 7579
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Thu Jul 02, 2020 11:05 am

The development version has been updated so that the GD-77S uses the voice prompt files instead of its built in speech synthesiser chip.

https://github.com/rogerclarkmelbourne/ ... 2020.06.27


All GD-77S users updating to this, and future versions of firmware need to load the latest voice prompts data which contains the new phrases for the GD-77S

https://github.com/LibreDMR/voice-promp ... 2020.06.02


Previous versions of voice prompts should work with this firmware, except prompts will be missing on the GD-77S until the latest prompt data is loaded.

If anyone experiences any problems using this firmware with their existing prompts, please update to the latest prompts and also post here to let me know which prompt file they were using.

OM8AMV
Posts: 75
Joined: Thu Jun 25, 2020 7:26 pm

Re: New ongoing "Development" version has been created

Post by OM8AMV » Thu Jul 02, 2020 7:58 pm

Thanks, its work, beep is off and saved :D

VK3KYY
Posts: 7579
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Thu Jul 02, 2020 11:26 pm

I fixed a bug in the GD-77S where the contact name was not getting announced when the contact was changed by pressing SK1 or SK2, in "Channel mode"

https://github.com/rogerclarkmelbourne/ ... 2020.06.28

No other versions were affected by this bug

VK3KYY
Posts: 7579
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia

Re: New ongoing "Development" version has been created

Post by VK3KYY » Fri Jul 03, 2020 3:24 am

Bug has now been fixed on the Last Heard screen, where only 15 of the possible 16 characters width of the screen was being used.

User avatar
Ik0nwg
Posts: 245
Joined: Sat Nov 16, 2019 7:23 am
Location: JN61VG
Contact:

Re: New ongoing "Development" version has been created

Post by Ik0nwg » Fri Jul 03, 2020 3:39 am

VK3KYY wrote:
Fri Jul 03, 2020 3:24 am
Bug has now been fixed on the Last Heard screen, where only 15 of the possible 16 characters width of the screen was being used.
thanks Roger, you've been fast
ciao

Locked