PO-101 APRS TX freq.
PO-101 APRS TX freq.
This question is come from viewtopic.php?f=12&t=3940&start=4 by ec2ut.
I just have the same question and confrmed by setting APRS mode to PTT in the APRS options, but it is not resolved.
PO-101 APRS TX freq. is diplayed same as RX freq. I don't know how to display the correct one. Pls check.
I just have the same question and confrmed by setting APRS mode to PTT in the APRS options, but it is not resolved.
PO-101 APRS TX freq. is diplayed same as RX freq. I don't know how to display the correct one. Pls check.
- Attachments
-
- PO-101 APRS.jpg (166.55 KiB) Viewed 3329 times
-
- APRS Mode.jpg (157.25 KiB) Viewed 3329 times
-
- satellites.jpg (73.34 KiB) Viewed 3329 times
Last edited by BD4SMY on Thu Apr 25, 2024 1:24 am, edited 1 time in total.
Re: PO-101 APRS TX freq.
https://github.com/LibreDMR/OpenGD77_Us ... ata-screen
To select the Voice, APRS or Beacon fequency, press the keys 1, 2 or 3 respectively.
Note:
Keys 1, 2 and 3 currently only operate on this screen and not the Polar or other satellite screens.
To select the Voice, APRS or Beacon fequency, press the keys 1, 2 or 3 respectively.
Note:
Keys 1, 2 and 3 currently only operate on this screen and not the Polar or other satellite screens.
Re: PO-101 APRS TX freq.
The APRS Mode (from the Options submenu) has nothing to do with the Satellite's APRS.
Once in Satellite screen, APRS auto beaconing is disabled.
In Satellite screen, when you select the "APRS" mode, it uses APRS frequency from the keps, and you have to press PTT to xmit a beacon.
Once in Satellite screen, APRS auto beaconing is disabled.
In Satellite screen, when you select the "APRS" mode, it uses APRS frequency from the keps, and you have to press PTT to xmit a beacon.
Re: PO-101 APRS TX freq.
This image which I had posted is just when I press the key 2 on the PO-101 frenquency screen.
After I set the TX2 (APRS) freq of PO-101 as 437.500 like EC2UT [viewtopic.php?f=12&t=3940&start=4], the above screen is displayed APRS TX freq as 145.900 (the same as RX freq), that is the bug / problem.
Since VK3KYY [viewtopic.php?f=12&t=3940&start=7] said that APRS mode in APRS option, I just pay attention that and changed it.
Re: PO-101 APRS TX freq.
I rechecked the code, PTT or Manual mode are supported.
Re: PO-101 APRS TX freq.
Could you please give me the detail setting step by step and give the successful screenshot image for me? thanks a lot.
I had use PTT mode, but also can't let the PO-101 APRS TX freq be changed to 437.5 Mhz.
Re: PO-101 APRS TX freq.
About the frequency, I need to check the CPS first.
Re: PO-101 APRS TX freq.
I've found a bug in the FW code about APRS TX Freq.
Re: PO-101 APRS TX freq.
Send me an email (address is available on QRZ.com), and tell me which build you need to test (DM-1701 or RT-84).