Administrator rights? More then a few of amateur radio programs I use need admin rights to run properly.
Code plug read/write error
Re: Code plug read/write error
Re: Code plug read/write error
Most programs need admin rights to install but the CPS should not need it to run.
Re: Code plug read/write error
Hi.
I have the same problem.
Radio during downloading codeplug reset and show up errors:
"Operation I/O break..."
or
"Port is closed"
or
"Device connected to the computer not working"
After acknowledge got message "Read Codeplug Complete" but download only my callsign and DMR ID.
I have the same problem.
Radio during downloading codeplug reset and show up errors:
"Operation I/O break..."
or
"Port is closed"
or
"Device connected to the computer not working"
After acknowledge got message "Read Codeplug Complete" but download only my callsign and DMR ID.
Re: Code plug read/write error
Is the IO error half way through writing the codeplug ?
Re: Code plug read/write error
About 1 second after I try to write
I know it can connect because it can read the eprom
I know it can connect because it can read the eprom
Re: Code plug read/write error
I have now tried both the Tier 1 and Tier 2 firmwares, No issues writing the firmwares,
I have now tried a third computer running Win 10 still get the I/O error
I have now tried a third computer running Win 10 still get the I/O error
Re: Code plug read/write error
Writing the firmware uses USB HID, the codeplug uses a COM port, hence the firmware loading may work even when the codeplug write doesn't.
Re: Code plug read/write error
Download this zip file and unzip into a folder and then try running the GD77CPS.exe
https://drive.google.com/open?id=1QFqqu ... VSBaIfvwk8
It will still fail to upload, but it should provide a lot more debugging information, and possibly show which line in the source code has the problem
https://drive.google.com/open?id=1QFqqu ... VSBaIfvwk8
It will still fail to upload, but it should provide a lot more debugging information, and possibly show which line in the source code has the problem
Re: Code plug read/write error
ee the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.IOException: The I/O operation has been aborted because of either a thread exit or an application request.
at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str)
at System.IO.Ports.InternalResources.WinIOError()
at System.IO.Ports.SerialStream.get_BytesToRead()
at System.IO.Ports.SerialPort.get_BytesToRead()
at DMR.OpenGD77Form.ReadFlashOrEEPROMOrROMOrScreengrab(OpenGD77CommsTransferData dataObj) in d:\projects\rogerclark\DMR\radioddity_gd-77_cps\Extras\OpenGD77\OpenGD77Form.cs:line 272
at DMR.OpenGD77Form.worker_DoWork(Object sender, DoWorkEventArgs e) in d:\projects\rogerclark\DMR\radioddity_gd-77_cps\Extras\OpenGD77\OpenGD77Form.cs:line 954
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.IO.IOException: The I/O operation has been aborted because of either a thread exit or an application request.
at System.IO.Ports.InternalResources.WinIOError(Int32 errorCode, String str)
at System.IO.Ports.InternalResources.WinIOError()
at System.IO.Ports.SerialStream.get_BytesToRead()
at System.IO.Ports.SerialPort.get_BytesToRead()
at DMR.OpenGD77Form.ReadFlashOrEEPROMOrROMOrScreengrab(OpenGD77CommsTransferData dataObj) in d:\projects\rogerclark\DMR\radioddity_gd-77_cps\Extras\OpenGD77\OpenGD77Form.cs:line 272
at DMR.OpenGD77Form.worker_DoWork(Object sender, DoWorkEventArgs e) in d:\projects\rogerclark\DMR\radioddity_gd-77_cps\Extras\OpenGD77\OpenGD77Form.cs:line 954
at System.ComponentModel.BackgroundWorker.OnDoWork(DoWorkEventArgs e)
at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument)