Reset when scanning

ea3ihi
Posts: 87
Joined: Fri Jan 10, 2020 9:28 pm
Location: Barcelona, Spain

Re: Reset when scanning

Post by ea3ihi » Wed Feb 26, 2020 4:49 pm

I edit the message, i thought I had found a race condition while looking for a next channel but it is not the case.

Ve2kzp
Posts: 1
Joined: Tue Mar 03, 2020 5:26 pm

Re: Reset when scanning

Post by Ve2kzp » Tue Mar 03, 2020 5:52 pm

I found a way to reproduce the problem easily, find a motorola capacity plus system then program 2 channel per frequency (TS1/TS2). Make sure you got the rest channel( the one with the carrier coming on and off every second. Set scan delay to 1sec and filtering to cc/ts/tg then scan, it wont be long to reset. My both gd77 run march 2 version and they both reset but not at the same time.

There is no need to have an fm channel in the scan.

If you exclude the rest channel it will be longer to reset so I guess the problem is related with the timing of the scan related to the carrier switching on and off

Btw, with the new tg filtering option, I’m able to follow a Tg on a tier3 system and it works pretty well excluding the reset every few minutes.

Thank you Guys for all the good work!

73
VE2KZP

Post Reply