Page 1 of 1
[Fix in next release] CWID Breaks Operations
Posted: Sun Jan 12, 2020 8:56 pm
by kd2lh
If I turn on the CW ID feature (In MMDVMHOST Expert settings), the hotspot will stop operating properly.
This error is seen in the live log:
E: 2020-01-12 20:51:20.847 Unable to read the firmware version after six attempts
and eventually the DMR connections to the VOIP network (DMR Enabled and Network Status) (Brandmeister) turn RED.
When I stop CW ID Mode and reboot, all operates properly.
Re: OpenGD77 Hotspot Mode CWID Breaks Operations
Posted: Sun Jan 12, 2020 10:18 pm
by VK3KYY
Re: OpenGD77 Hotspot Mode CWID Breaks Operations
Posted: Sun Jan 12, 2020 11:47 pm
by kd2lh
Thanks Roger. Let me know how I can help.
Marc
Re: OpenGD77 Hotspot Mode CWID Breaks Operations
Posted: Mon Jan 13, 2020 12:34 am
by VK3KYY
kd2lh wrote: ↑Sun Jan 12, 2020 11:47 pm
Thanks Roger. Let me know how I can help.
Marc
I had a quick look at the code, but I can't see anything obviously wrong
Re: OpenGD77 Hotspot Mode CWID Breaks Operations
Posted: Mon Jan 13, 2020 4:17 am
by F1RMB
Hi Marc,
kd2lh wrote: ↑Sun Jan 12, 2020 8:56 pm
If I turn on the CW ID feature (In MMDVMHOST Expert settings), the hotspot will stop operating properly.
This error is seen in the live log:
E: 2020-01-12 20:51:20.847 Unable to read the firmware version after six attempts
and eventually the DMR connections to the VOIP network (DMR Enabled and Network Status) (Brandmeister) turn RED.
When I stop CW ID Mode and reboot, all operates properly.
Okay, I raised a PR to fix this, and another one about new private call handling.
Cheers.
Re: OpenGD77 Hotspot Mode CWID Breaks Operations
Posted: Mon Jan 13, 2020 4:27 am
by VK3KYY
Thanks
I was about to test the CW ID to see why it failed, but I'll now pull the PR and test it to confirm if the change fixes it.
Re: OpenGD77 Hotspot Mode CWID Breaks Operations
Posted: Mon Jan 13, 2020 6:05 am
by VK3KYY
Its been running for several hours on TG91 without any problems, so I think its fixed.
However I won't be releasing an update for a few days as there are other non-Hotspot related bugs which need to be fixed before I can do that.
Re: [Fix in next release] CWID Breaks Operations
Posted: Sat Jan 18, 2020 2:12 am
by kd2lh
Now testing with the 20200116 version firmware.
In Expert / edit_mmdvmhost / CWID is set to "1" and TIME is set to "5" for testing.
The hotspot does not lockup as in the prior bug, but no code is being transmitted at the 5 minute (or any) interval.
I would expect to hear my configured call in Morse audio on an analog HT tuned to the hotspot frequency.
Have the complete fixes been committed by this firmware, or is this still being worked on?
Thanks again, Marc
Re: [Fix in next release] CWID Breaks Operations
Posted: Sat Jan 18, 2020 2:30 am
by VK3KYY
Transmission of CW ID is not currently supported and the command is currently ignored.