[Fixed] Occasional transmission on the wrong TimeSlot

[IU4LEG]

Good morning everyone,
This morning, after updating the firmware to the version of December 31, me and IZ4RCU Samuele did qso locally (TG9 TS2) on a repeater in our area. For a moment, after several passages, Samuele didn't hear me anymore because my radio had gone to transmit on time slot 1. Moving on TS1, Samuele listened to me. Then, my radio went back to transmit on TS2 in the following steps.
The repeater hardware is a Motorola SLR5500.
I attach the dashboard with the steps of the qso and the screenshot of the type of repeater. The repeater is called IR4UBY.

have a nice day IU4LEG

[VK3KYY]

Can you also try this version

This may be better, but it may also make things worse

[IU4LEG]

ok, tnx
i will try it

[IU4LEG]

ok,
I tried this version but it seems that the situation has worsened ... during a qso of about 30 minutes with Samuele IZ4RCU, the radio has transmitted several times on the wrong time slot. (IR4UBY repeater)
Then, we passed on the ir6uda repeter we did qso for another 15 minutes and it happened there also 2 times.
ir6uda is also a motorola repeater.

[G4EML]

This should really be moved to a new thread because the original problem of simultaneous transmission on both timeslots has been fixed.

The problem with occasionally transmitting on the wrong timeslot is a different one.


IZ2EIB,
It sounds like your problem talking between two radios is down to the behaviour of the factory firmware. The factory firmware has a bug where it will only receive if the talkgroup is included in a RX group. You must have a RX group setup on every channel even if you only want to use one talkgroup. This is different from most DMR radios which will normally always receive the talkgroup you are transmitting.

Colin.

[IU4LEG]

ok Colin, i agree

[IU4LEG]

As already mentioned on the thread "Simultaneous transmission on both time slots", it seems that the radio now transmit sometimes on the wrong timeslot.
I open a new thread because it seems to be a different problem from the previous one. As a result we continue the discussion on this thread.
best regards.
IU4LEG

[VK3KYY]

Guys

I intended to split the topic and move all posts to the new topic, but it looks like it only moved one post to the new topic,

So I have manually moved all the posts to this new topic

[IU4LEG]

Ok sorry Roger. also delete my post that I just created

[VK3KYY]

Ok sorry Roger. also delete my post that I just created

No worries

Happy New Year... Its now 00:31 local time on 1st Jan 2020 for me. Time for bed.