P2 long press equals SK2 + P2, this is increase RF power, instead of NOTHING as DM1801 and GD77 behave.
P1 long press does nothing (same as DM1801 and GD77)
(Maybe it can be useful to have TG scrolling P1/P2 -Left/Right-, long pressing at DMR)
![Wink ;)](./images/smilies/icon_e_wink.gif)
I will check this, because the MD2017 version uses the same UI as the DM1701, and no one with that radio reported thisEA3BIL wrote: ↑Sat Feb 03, 2024 2:40 pmIt looks to work properly with all functions, just a little mistake that came across...
P2 long press equals SK2 + P2, this is increase RF power, instead of NOTHING as DM1801 and GD77 behave.
P1 long press does nothing (same as DM1801 and GD77)
(Maybe it can be useful to have TG scrolling P1/P2 -Left/Right-, long pressing at DMR)
![]()
VFO behaves correctly...
VK3KYY wrote: ↑Sun Feb 04, 2024 9:13 amI think its a mistake in the code that long press P2 is increasing the power.
Long press of P1 does not decrease the power
I'm not sure why the firmware is doing this on the STM32 radios which have a Right button. The GD-77 and similar radios do not increase power on Long press of Right
Power increase should AFIK only be via SK2 + Right