CODE PLUG ISSUE

[KC8USA]

I have 8 hotspots on different frequencies & different talkgroups in this codeplug. I have done this on several other radios so I can just toggle between talkgroups by switching zones. It does not work on this radio -When I toggle thru the zone's they all say the same talkgroup, but are receiving on the programmed talkgroup. Why? Please see attached codeplug.

10_ZONES_12-23-2019-4.g77

(128 KiB) Downloaded 147 times

[m1dyp]

i'm not too sure, but i think you need a tg list for each zone, then assign each channel to that zone.

al;so, when I loaded your code plug, it was in the old 16 channel format, so you might need to upgrade the CPS to the newer community version. good luck