[Already fixed] channel or VFO scan with voice prompt level 3 causes constant speech triggering

Post Reply
ke4dyi
Posts: 14
Joined: Sun May 31, 2020 6:07 pm

[Already fixed] channel or VFO scan with voice prompt level 3 causes constant speech triggering

Post by ke4dyi » Mon Jul 20, 2020 12:17 pm

If the radio is set to voice level 3 and you attempt to scan either channels or VFO, speech is constantly triggering. There should probably be an exception for scan modes, otherwise you have to change the prompt level to something other than 3.

VK3KYY
Posts: 2960
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: channel or VFO scan with voice prompt level 3 causes constant speech triggering

Post by VK3KYY » Mon Jul 20, 2020 12:37 pm

Already fixed in the development version of the firmware

Please always load the Unstable / Development version of the firmware, before posting issues, or look in the thread about the development version.

See

https://github.com/rogerclarkmelbourne/ ... /releases/

For a full list of fixes which are currently available for everyone to download a test

ki4gst
Posts: 15
Joined: Sun Jul 26, 2020 2:07 am

Re: channel or VFO scan with voice prompt level 3 causes constant speech triggering

Post by ki4gst » Sun Jul 26, 2020 10:59 pm

VK3KYY wrote:
Mon Jul 20, 2020 12:37 pm
Already fixed in the development version of the firmware

Please always load the Unstable / Development version of the firmware, before posting issues, or look in the thread about the development version.

See

https://github.com/rogerclarkmelbourne/ ... /releases/

For a full list of fixes which are currently available for everyone to download a test
Actually I still have a voice trigger in scan mode when ever it stops on a active channel the voice kicks in. I have the latest unstable that you uploaded with the low battery alerts.
73
Robert ki4gst

VK3KYY
Posts: 2960
Joined: Sat Nov 16, 2019 3:25 am
Location: Melbourne, Australia
Contact:

Re: [Already fixed] channel or VFO scan with voice prompt level 3 causes constant speech triggering

Post by VK3KYY » Sun Jul 26, 2020 11:40 pm

The channel will announce on Voice level 3 when the scan stops, otherwise you won't know what channel its on.

Turn the prompt down to level 2 or just Voice, if you don't want it to do that.

Post Reply