Squelch settings in GD77 options menu appear to do nothing
Posted: Thu Jul 02, 2020 4:49 pm
Firmware: Built 203515 Jul2 2020 Git Commit 91DEC5D
Problem: VHF and UHF Squelch settings in Options menu appear to have no effect, or at least won't open fully.
Steps to reproduce.
1. Tune to a frequency in either the 2m or 70cm bands.
2. Ensure no RX CTCSS or DCS tone is selected.
3. Go into the Menu > Options > and adjust VHF or UHF squelch (depending on which band you are on) all the way down to 0%.
Expected Results: Open squelch, constant noise.
Actual Results: silence.
Can anyone else reproduce this?
Problem: VHF and UHF Squelch settings in Options menu appear to have no effect, or at least won't open fully.
Steps to reproduce.
1. Tune to a frequency in either the 2m or 70cm bands.
2. Ensure no RX CTCSS or DCS tone is selected.
3. Go into the Menu > Options > and adjust VHF or UHF squelch (depending on which band you are on) all the way down to 0%.
Expected Results: Open squelch, constant noise.
Actual Results: silence.
Can anyone else reproduce this?