point to point digital radio
point to point digital radio
I know that the question runs away from the purpose of the group, if it is not possible to clarify thank you. In the event of having 2 digital radios with opengd77 without access to brandmeister or repeater it is possible to program the codeplug so that the radios communicate in digital alone mode, which configuration to use. I tried several changes color code, ID, frequency, slot - without success
Regards
Regards
Re: point to point digital radio
Hi!PU4BLA wrote: ↑Mon Nov 21, 2022 7:48 pmI know that the question runs away from the purpose of the group, if it is not possible to clarify thank you. In the event of having 2 digital radios with opengd77 without access to brandmeister or repeater it is possible to program the codeplug so that the radios communicate in digital alone mode, which configuration to use. I tried several changes color code, ID, frequency, slot - without success
Regards
Of course it's possible. Just set the Rx and Tx freq the same, choose a CC and TG, TS is irrelevant in this mode, and set the same for all the radios. Then they should communicate together.
With regards,
Pavel OK1PT
Re: point to point digital radio
thank you very much, I will do that !
Regards
Regards
Re: point to point digital radio
Sorry for the inconvenience.
I did the programming and even changing the frequency within the band limits on two radios, the message comes when transmitting:
"ERROR OUT OF BAND" can you help me, something is wrong.
Regards
I did the programming and even changing the frequency within the band limits on two radios, the message comes when transmitting:
"ERROR OUT OF BAND" can you help me, something is wrong.
Regards
Re: point to point digital radio
Try Options, Radio Options, Band Limits and set it to CPS or OFF
73, DO3HB
Re: point to point digital radio
Re: point to point digital radio
I thank you for your support and i congratulate all the team that develops OPENGD77.
Regards
Regards