Search found 934 matches
- Mon Feb 12, 2024 11:31 pm
- Forum: TYT MD-9600 / Retevis RT-90
- Topic: Retained Settings After Flashing OpenGD77 Firmware
- Replies: 13
- Views: 1759
Re: Retained Settings After Flashing OpenGD77 Firmware
This is normal. cS2 indicates that the timeslot is being controlled by your contact setting. When you define a talkgroup or contact you can also assign it a timeslot. Loading new firmware will never reset the channels. They are defined in the codeplug and that never reset. If you want to remove chan...
- Sun Feb 04, 2024 12:50 pm
- Forum: TYT MD-9600 / Retevis RT-90
- Topic: Subaudible decoding
- Replies: 2
- Views: 1163
Re: Subaudible decoding
Yes, that is quite normal. CTCSS decoders in many radios will often respond to one tone either side of the correct one. This is due to the bandwidth of the tone filtering. When scanning tones the firmware stops on the first one it finds. DCS doesn't suffer from this as two adjacent codes are complet...
- Wed Jan 31, 2024 12:56 pm
- Forum: TYT MD2017 / Retevis RT-82
- Topic: TYT MD2017 / Retevis RT-82 Public Alpha version
- Replies: 76
- Views: 7753
Re: TYT MD2017 / Retevis RT-82 Public Alpha version
Password is the release version. Rxxxx.xx.xx.xx
It is displayed in the title line at the top of the password entry form.
It is displayed in the title line at the top of the password entry form.
- Tue Jan 30, 2024 10:50 pm
- Forum: Other unsupported radios
- Topic: Quansheng DM600UV [Not able to support]
- Replies: 5
- Views: 1035
Re: Quansheng DM600UV
Just looking at the picture it looks like the LCD display is not pixel based but uses individual fixed icons and a small text areas for the frequencies/channels. That would make it very difficult to use with OpenGD77 as it would not support the current display methods and would need major rewrite of...
- Sun Jan 28, 2024 3:39 pm
- Forum: CPS
- Topic: Question: CPS 2024.01.22.01 and programming for Talk Groups
- Replies: 5
- Views: 2355
Re: Question: CPS 2024.01.22.01 and programming for Talk Groups
Contact and TG List are mutually exclusive on a channel. You either define a contact and that is what will always be used when making a call. Or you define a TG List which allows you to select the contact to be used from the list. Unlike most DMR radios the TG List is used for both Tx and Rx. This i...
- Fri Jan 19, 2024 11:26 pm
- Forum: CPS
- Topic: Channel CSV construction and import struggles
- Replies: 8
- Views: 2518
Re: Channel CSV construction and import struggles
Two Problems,
You have used NONE instead of None in many lines. The Input Parser is fussy! Use notepad++ to change all NONE to None.
The last Line for WX7 has no channel number (248) at the beginning and no CR LF at the end.
Having corrected these the file loads OK.
Colin G4EML
You have used NONE instead of None in many lines. The Input Parser is fussy! Use notepad++ to change all NONE to None.
The last Line for WX7 has no channel number (248) at the beginning and no CR LF at the end.
Having corrected these the file loads OK.
Colin G4EML
- Fri Jan 19, 2024 9:55 am
- Forum: Other unsupported radios
- Topic: TYT MD-380 / RT-3 - Not supported [FM only sources]
- Replies: 4
- Views: 6303
Re: TYT MD-380 / RT-3 - Not supported [FM only sources]
No, openGD77 is not supported in the MD380 / RT3 single band radios. The hardware is different.
- Fri Jan 19, 2024 1:17 am
- Forum: TYT MD-9600 / Retevis RT-90
- Topic: [User error] Master Power not working in channel
- Replies: 17
- Views: 2542
Re: [User error] Master Power not working in channel
I think you are refering to the fact that the original firmware appeared to support two frequencies or channels at the same time. In fact the radio only has one receiver so it was always scanning between the two. OpenGD77 does not support this. Only one channel or VFO frequency can be selected at a ...
- Tue Jan 16, 2024 11:21 pm
- Forum: CPS
- Topic: Channel CSV construction and import struggles
- Replies: 8
- Views: 2518
Re: Channel CSV construction and import struggles
I have just cut and pasted the lines from your post into my channels.csv. Both 99 and 103 imported correctly without errors, so I don't think your problem relates to quotes or tabs. As Roger says, the CSV import has quite a bit of error checking but it is impossible to predict every possible situati...
- Tue Jan 16, 2024 10:54 pm
- Forum: CPS
- Topic: Channel CSV construction and import struggles
- Replies: 8
- Views: 2518
Re: Channel CSV construction and import struggles
The tab character is used to force a spreadsheet program to treat the value as text and not a number. It was intended to prevent channel names (which can contain numbers but are really text) being interpreted as numbers and loosing digits. It is not really needed on frequencies . If a tab is present...