OpenGD77

First of all, I would like to thank all the masters (F1RMB, SA0BUX, VK3KYY) who replied to me. I found the source of the problem. As you know, since there is no DMR server in Turkey, I have to use servers from other countries. I used the Bulgarian server in my first duplex hotspot with my mmdvm card...

First of all, I would like to thank all the masters (F1RMB, SA0BUX, VK3KYY) who replied to me. I found the source of the problem. As you know, since there is no DMR server in Turkey, I have to use servers from other countries. I used the Bulgarian server in my first duplex hotspot with my mmdvm card...

I haven't entered any aprs password for my HAT hotspots, but I can try running a pi-star only connected to a OpenGD77 radio to see what happens. I think it should work out of the box. I couldn't see where to enter the aprs password in the hotspot. I have made a hotspot with mmdvm cards before and I...

Yes, few years ago all the APRS connection has been moved to the dedicated APRSGateway software. Of course, in its configuration, you also need to enter your own Ham "password" to connect aprs.fi (I think there is an editor in the Expert "tab" fro the APRSGateway). You can also take a look at the A...

If I used MMDVMHost standalone (on a Linux host without pi-star) I noticed that aprs.fi wasn't update so it's probably some other component in pi-star that reports to aprs.fi , probably APRSGateway. But check that you enabled it in pi-star: Capture.JPG Sir, I added two screenshots, the settings are...

AFIK aprs.fi is a completely different service to Brandmiester. The hotspot does not receive APRS signals on FM or DMR and send then to aprs.fi, so I can't see why it should appear on the aprs.fi map. The firmware can't receive APRS FM signals, or operate in FM mode with PiStar In DMR mode the hots...

I looked for the answer to this question in the forum but could not find it, so I opened this article. I successfully installed the Opengd77 firmware on my DM1701 radio and made all zone and channel settings in CPS correctly. Additionally, I successfully loaded the file I downloaded from Pistar ont...

I looked for the answer to this question in the forum but could not find it, so I opened this article. I successfully installed the Opengd77 firmware on my DM1701 radio and made all zone and channel settings in CPS correctly. Additionally, I successfully loaded the file I downloaded from Pistar onto...

Hi, the "not working link" works fine on my end. Can you try via a different provider (i.e. via mobile device network)? A copy of the ZIP/donor file is also available i.e. here: https://sa0bux.se/Ham/opengd77/ (link is taken from previous posts here in the forum). Side note: the above is obviously ...

Hello, first of all, thank you in advance for the answers. In the steps required to install OPENGD77 on my Dm1701 radio, the website of the donor (MD9600-CSV(2571V5)-V26.45.bin) firmware does not open and according to my research, I could not find a download link. Can you give me a link to download ...