OpenGD77

Hi to all, unfortunately due to a faulty cable or USB port, I broke 3 GD77. :( I have thoroughly analyzed the fault in the laboratory. The radios were without signs of life, absorbing about 120milli amps. I found that there was a short circuit on the part of the voltage regulators that powered the M...

thanks Roger, we are testing the version, for now all good.

IZ4RCU

Hi to all guys,

i have the latest firmware, and occasionally my radio change the TS for 1 to 2 or viceversa.
other OM in the world with this boring problem?
I attach a screen of the dash board:

Av salut


Samuele

Now I will try Roger, Thanks

Thanks so much! You are fantastic! I immediately install the latest version!
73
IZ4RCU

Roger, When a crossband channel is initially selected it is actually receiving but at reduced sensitivity. When PTT is pressed and released the sensitivity returns to normal. This is because the wrong Rx Preamp is initially being selected by trxSetFrequency(), it is basing the selection on the Tx f...

Hi to all, I use the latest firmware version: In my area, usually I use an analog crossband repeter (called also transponder repeter). Input in 145Mhz Out in 431Mhz. I have successfully saved the “splitted” frequency on the memories with OpenCPS, it works fine but: When I move to my splitted memory ...