OpenGD77

Assuming, as you mentioned, that the same configuration worked with that repeater previously, there are a couple of options: - HT antenna: you can try with another antenna or ideally with an external antenna to see if you can hit the repeater. If you have acces to a VNA, maybe you can measure the an...

I have tried adjusting the squelch only way i can hear the repeater is to have the squelch wide open,so i am guessing this radio has a hardware issue, and is still under warrenty If you're using same antenna and transmission line with the IC-V8000, yes: the TYT has a hardware issue or the Icom has ...

Paint this picture in your head, I have a new TYT9600 V5 with stock firmware, and i cant hit the same repeaters as I can with the old radio ICV-8000, So it tells me that the tyt isnt sensitive enough in the front end, Now if I put the opengd77 firmware on it will it help, I have the opengd77 on all...

You can write your desired codeplug to the radio with the original CPS, then read it with OpenGD77 CPS and save it. AFAIK this could be done even with original firmware.
I don't know if the OpenGD77 CPS can directly read "original" codeplug files, maybe this is another -easiest- option.

This one is the last beta viewtopic.php?f=19&t=3167
Remember to use the last CPS which you can find here viewtopic.php?f=12&t=3168

Okay, There is no keps in your codeplug. Hence, each time you write it, it clears the previous keps you've uploaded. Hence, upload the keps, read back the codeplug, save it on your computer. This way, next time you flash the codeplug, this "old" keps will survive. Cheers. --- Daniel Understood! I d...

F1RMB wrote: ↑

Fri Aug 11, 2023 2:45 pm

Hi,

I tried to reproduce, but it works as expected.
Do you have a boot melody, boot screen ?

Also, can you send me your codeplug, this way I can test in the same conditions.

Cheers.
---
Daniel

Sure, it's attached.

Hi, I started playing with themes since my UV390 arrived last week. But I've found that when I write themes to the radio (at least with the two last CPS versions), the satellite list disappear (radio shows "empty list") and a new upload of keps file is needed to recover that list. Let me know if I c...

Your codeplug is working for me on both UV380 and also GD77 Try clearing all your APRS configs and make a new one and do not change anything in that config Use the latest CPS 2023.08.10.01 It worked! Now I can transmit APRS info both on channels with APRS config associated and on VFO also, and get ...

VK3KYY wrote: ↑

Thu Aug 10, 2023 12:27 am

What is the firmware code in the firmware info screen?

Zip and post your codeplug

Firmware info:
Buit 20230809204854
[ 3cf6fd3 D ]
CPU STM

Codeplug attached, with testing purposte channel "APRS 144.930" whith APRS1 config associated to it.